IMG_7750_2

It’s school supply time.

Is it just me, or are those lists getting longer and more complicated every year?

45 boxes of crayola crayons, 19 glue sticks, 14 bradded plastic folders with pockets, 2 cases of tissue boxes, chisel-tipped dry erase markers, thin-tipped dry erase markers, headphones, 6 packages of baby wipes, 2 kinds of flash cards, 1 1965 AMC Rambler Classic 770 Convertible.

(They sneak things in there, you have to be careful).

And pencil cases.

Of course you can buy pencil cases from the store, but you can also sew one up yourself in just a few minutes.

IMG_7761_2

You need some fabric remnants or bits of discarded clothing you can cut up (denim would be nice), a 9 inch zipper, and heavy duty fusible interfacing and thread, but that’s it.

I’m biased, but I think these are cuter and far more durable than the mass-produced versions. Leave out the three loops that attach it to the binder, or use just one, longer, loop, and you have yourself a regular zippered pouch for cosmetics or art supplies or a first aid kit, or, or, or . . . anything that will fit in an 8″x11″ pouch.

You can personalize it with a monogram if you like.  Or school colors and logos, applique, embroidered patches, pockets, crazy fabrics, photo printing on fabric, original art, your imagination’s the limit.

I made mine with a two-fabric front, but this is optional. For simplicity’s sake, you can make the front one-piece. In that case, cut two pieces the same dimensions as I list for the back piece. Either way, you’re going to end up with two 8’x11′ pieces of fabric.

3-ring Binder Pencil Pouch

Procedure:

Cut two pieces of fabric for the front:

(1) 6 1/2 in. x 11 in. of your main fabric

(1) 2 1/2 in. x 11 in. of your accent fabric

IMG_7699_2-min

Sew the two pieces of fabric together with a 1/2 inch seam allowance along the long edges of your fabric to form one 8×11 inch piece.

IMG_7701_2-min

Iron the seam open.

IMG_7703-min

Cut one piece of fabric for the back:

(1) 8 in. x 11 in. from either your main or accent fabric or another fabric of your choice

You now have two pieces of fabric that should both be 8×11 inches. Put them together to verify they are the same dimensions. If there is some variation, trim them so they are identical in size.

Cut two pieces of the interfacing, each 8×11, to match the front and back pieces.

IMG_7705

Iron the interfacing to the wrong sides of the front and back according to the interfacing directions.

You now should have two interfaced pieces of fabric.

IMG_7707-min

Take the zipper out of the packaging and place it, right sides together, along the accent piece edge of the front fabric. Pin, tape, or (my favorite option) use a 1/4 inch strip of stitch witchery to temporarily iron one side of the zipper to the fabric edge. Both pinning and taping are fine, however.

IMG_7709-min

Replacing the regular foot of your sewing machine with the zipper foot, sew along the edge close to the zipper teeth, moving the zipper tab out of the way as needed to sew a straight line.

IMG_7710-min

Next, pin, tape, (or stitch witch) the back fabric to the other side of the zipper, again right sides together.

IMG_7715-min

Sew the seam.

IMG_7719-min

It should look like this.

IMG_7722-min

Iron the seams flat.

IMG_7724

Topstitch to keep the zipper in place.

IMG_7726

Cut a long strip of fabric, 1 1/2 in. wide and 9 inches long to make the 3 loops for the rings of the binder. Fold the strip, lengthwise, wrong sides together, and sew along the long seam with a 1/4″ seam allowance.

IMG_7728

Use a safety pin or a tube turner to turn the tube right side out and iron flat.

IMG_7730

Topstitch along the tube length.

IMG_7732

Cut the tube into three equal sections, each 3 inches long.

IMG_7736

Fold each section in half to form 3 loops and pin each to the inside edge of the front piece of the pouch fabric at the measurements as shown below, 1 1/2 inches from the side, with the middle one centered 5 1/2 inches from each side. You can also hold it up to a 3 ring binder and mark the rings’ positions.

IMG_7739

Fold the back piece of the pouch over the front, sandwiching the loops inside and pin.

IMG_7740

Unzip the zipper (important, or you’ll have a tough time turning it right side out!)

IMG_7741

Sew around the pouch with a 1/2 inch seam.

Clip corners with scissors.

Turn right side out and iron the seams flat.

IMG_7743

Topstitch close to the loop edge all along the loop side of the pouch.

IMG_7744

You’re done!

IMG_7746

Let me know if you make one!

IMG_7756_2